Angular Contact Ball Bearings

Contact Now

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

NTN 6304lu Bearing

0.0 8865590603596
M06110 PEER BEARING CO.

50 mm x 90 mm x 30.2 mm SKF 3210 ATN9 Angular Contact Ball Bearings

50 mm x 90 mm x 30.2 mm 60 mm
69,5 mm 385 kN

160 mm x 290 mm x 48 mm SKF QJ 232 N2MA Angular Contact Ball Bearings

11 mm 51100 V/HR11T1
0.2 kN 0.5 mm

100 mm x 180 mm x 34 mm SKF QJ 220 N2MA Angular Contact Ball Bearings

86 mm 100 mm x 180 mm x 34 mm
86 mm 170 mm

40 mm x 80 mm x 30.2 mm SKF 3208 A Angular Contact Ball Bearings

120 GX45N
36,5 36,5 mm

40 mm x 90 mm x 36,53 mm TIMKEN 5308W Angular Contact Ball Bearings

Industrial Shroud Seal
29.4 mm 2.374 in

1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 1.189 Inch | 30.2 Millimeter SKF 3210 E Angular Contact Ball Bearings

20,000 mm 50,000 mm
90,000 1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 1.189 Inch | 30.2 Millimeter

3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter TIMKEN 7317WNSU Angular Contact Ball Bearings

NJ30/670 3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter
230 230 mm

55 mm x 120 mm x 49.2 mm SKF 3311 A Angular Contact Ball Bearings

37 mm 7000 r/min
MPZ 42

45 mm x 100 mm x 39.7 mm SKF 3309 A Angular Contact Ball Bearings

6 mm 190
2450 kN 24138 K30
1/16